v4g obdii installation guide

Please have the vehicle outside with an unobstructed view of the sky to obtain and calibrate the GPS signal on the GPS device.
Locate the OBDII harness on the vehicle. NOTE*** It is usually under the dashboard on the driver side. Please reference the vehicles user manual for assistance in locating the vehicles OBDII harness.
Plug the GPS device firmly into the vehicles OBDII harness.
Please reference the GPS platform and wait for the GSM signal to be established. It can take a few minutes to establish a connection with the local cellular network.
Once a network connection is established you will see a location on the map.

The Red indicator light lets you know that your device is on and has power.
A solid Blue indicator light lets you know the status of your GPS signal. The GPS gives a current and accurate location for the device.
The Yellow indicator light lets you know the status of your GSM signal. The GSM module is what connects the device to local cellular networks.

FLASHING - Searching for GSM signal / SOLID - GSM has signal.

Please make sure the device is firmly plugged into the OBDII socket of the vehicle.
The first time the device is activated it can take several minutes to achieve a GPS signal. * Please make sure the vehicle is located outside with an unobstructed view of the sky.
FLASHING BLUE = Searching for GPS signal / SOLID BLUE = GPS has signal.
FLASHING YELLOW = Searching for GSM signal / SOLID YELLOW = GSM has signal.